C6 EVO

C6 Birth Control
C6 EVO Receiver

C6 EVO is a system which calls and sends SMS in the last days of the pregnancy of the horse and allows to control the most delicate phase of the delivery just in the moment in which it happens.
C6 EVO system has therefore the ability to remain in stand-by, without engage in debilitating nocturnal wakings, while there is nothing to worry about. The system will notify with a call or SMS only when it is the delivery time of the foal, keeping this phase safe and free from accidents.
C6 EVO is already used by hundreds of horse breeders and helped the birth of thousands of foals.

RANGE ON OPEN FIELD

500 MT
The C6 EVO transmitter has a range 5 times longer than the C6 Birth Control transmitter.
It is the same as C6 Birth Control transmitter in size and appearance but it has a LED light in it which, when blinking, signals the transmission of the radio waves helping to monitor the functionality of the system.
TOUCH SCREEN
The system is fitted with a touch screen pad where is simple to choose the language, see the GSM network signal, program the telephone numbers to call with sms text or voice and manage others important security settings.
LONG LIFE TRANSMITTER
Once the signal is picked up by the receiver the transmitter goes in stand-by and displays a double blinking of the light. At this point the transmitter stops sending radio signals and the usage of its internal battery is minimal allowing time to manage the foaling mare.
C6 EVO Receiver

C6 EVO receiver is the evolution of the C6 Birth Control receiver module and is usable in juction with the C6 EVO transmitters. The system is fitted with a touch screen pad where is simple to choose the language, see the GSM network signal, program the telephone numbers to call with sms text or voice and manage others important security settings. When it is activated by the transmitter on the screen appears the ID of the transmitter that is redirected by sms text on the list of the phone numbers programmed. In this way you can always keep track of the pregnancy and the foaling, which is the nightmare of every breeder. The system is provided by an internal battery, which works also during black outs, and of an opportune software that notices you of the lack of the 220 volt network. In this way every possible unwanted situation is covered and eveything stays safe. The goal of the C6 EVO is to provide in the next future also others specifics domotic utilities to the farmer and the breeders so to permit to use this brand new tecnology for a lot of common tasks.
C6 Birth Control

C6 Birth Control is composed by one microtransmitter and one receiving apparatus equipped with a modem GSM that carries out 8 telephone calls and sends SMS too in the moment of the activation, marked from the first stages of the delivery. Opportunely installed on the vulva in the last days of the pregnancy allows to control the most delicate phase of the delivery just in the moment in which it happens. C6 Birth Control system has therefore the ability to remain in stand-by way, without engage in debilitating nocturnal wakings the assigned staff when there is nothing to worry about and by notifing them only on the opportune moment.
For more infomations: http://www.sisteck.com
C6 Alarm Bell

C6 Bell Alarm is an accessory for the C6 EVO Receiver. This system is used when the GSM signal is weak or when the user wants to use a different method than the one which uses GSM and phones. The C6 Bell Alarm is placed in the house and notifies the user about the delivery without having to use a GSM system with a telephone.
Thanks to this system, even in remote locations or where the GSM signal is not very good, the user has not to worry about anything: the C6 Bell Alarm will monitor the pregnancy of the horse for him.
For more infomations: http://www.sisteck.com
E-mail was successfully sent. Thank you for reaching us!
The connection with the server timed out!